Solar Wash Protect (SWP) is a concentrated antistatic cleaning and protection product specifically developed for photovoltaic solar panels, effective in cleaning a wide range of organic dirt on the solar module. The antistatic properties of SWP make future cleanings easier, keeps the panel cleaner between cleanings, reduces cleaning time and water consumption by up to 50%.
Using the SWP solution to wash the solar modules, when compared to cleaning with water alone, allows an increase in solar panel efficiency of up to 5%, resulting in significant economic benefits for the PV system owner.
It is a solution designed for professionals who install photovoltaic plants, solar panel cleaning companies, and solar parks with their own maintenance teams.
If you are a professional looking to differentiate your services to the end customer, use a unique and innovative product, fully tested and certified by the international laboratory TÜV Sud, with letters of compliance from 12 of the 15 largest producers of photovoltaic solar panels in the world, biodegradable and environmentally friendly available on the market.
The surface of photovoltaic solar panels must be clean in order to ensure full operation and maximum efficiency. Any kind of dirt that may be on the surface of the solar module, be it dust, pollen, tree sap, bird droppings, sand, salt crystals, etc., will reduce the footprint of the sun's rays, i.e. reduce the amount of sunlight reaching the solar module cells, and thus the panel will produce less power.
To the naked eye the panels may appear clean, however there will be dirt accumulated, even if it is just the air pollution itself. A simple test to see if your panel is in need of cleaning is to wipe the surface of the panel with a white cloth or cotton pad before the actual cleaning.
According to recent studies, when a solar panel is very dirty it can lose up to 50% of its efficiency compared to a clean solar panel. However, an energy loss of 10 to 15% can be observed in panels with some dirt.
In fact, rain, snow, or wind alone does not wash the solar panels, because wind carries particles, snow because it blocks sunlight, and rainwater because it is slightly acidic and, when it dries, leaves spots that quickly attract dirt again, thus making the solar system less efficient.
A simple way to illustrate why the weather alone does not wash out the solar panels is to look at the windshield of your car. If you leave your windshield dirty for a long time, you will lose visibility due to accumulated dirt, but thanks to the cleaner that you apply and the windshield wiper, you can wash the glass and regain visibility in no time!
In this way, the solar panels are like the windshields of your car, except that they do not have readily available liquid for washing the solar panels associated with the windshield wiper.
In order for the warranty on your solar panel to remain valid, you should use solar panel cleaners that meet the manufacturers' requirements, such as Solar Wash Protect.
However, as a rule, products with neutral pH that are tested by international laboratories and that are approved by the solar panel manufacturers themselves as they rule out any negative effect of their use on washing solar panels.
Solar Wash Protect 50 - dilution ratio 1:50
Solar Wash Protect 300 - dilution ratio 1:300
For more information, see the Technical Sheet or contact us.
The SWP antistatic cleaning and protection solution effectively removes bird droppings, dust, ash, pollen, salt, cement dust, lichen, and any other kind of dirt.
What is the recommended amount of SWP solution to use?
ChemiTek recommends using between 105mL and 206mL per m² of photovoltaic solar glass. For example, if you have a solar photovoltaic panel with a surface area of 1 m², the usage per solar panel is between 105mL and 206mL, but if you have solar photovoltaic panels with a surface area of 2 m², the usage per solar panel is between 210mL and 412mL.
In case of doubt, contact us.
Solar Wash Protect as a cleaning product, in addition to efficiently removing different types of dirt, does not allow dirt to adhere as easily to the surface of the solar panel, due to its antistatic property. Therefore, by preventing the panels from getting dirty more quickly, it prevents a rapid decrease in the solar panel's power generation. Since dirt does not stick to the surface of the panel, in subsequent cleanings you will notice an easier and faster removal of dirt.